Full Height Speed Gate Turnstiles RS 1007-1A

1. Size: 1500x150x980mm (can be customzied)

2. Supply Voltage: 110V-240V, 50HZ/60Hz

3. Working Voltage: DC24V

4. Relative humidity: ≤95%, No Condensation

5. Unlock time: 0.2s

6. Material: 304 stainless steel

7. Arms material: 10mm acrylic

8. Motor: Brushless Servo Motor

9. Passage width: 600 mm standard 900 mm handicapped


Sliding Turnstile RS 1007-1A Also Called(Speedlane,Speed Barrier Gate,Speed Gate,Speed Turnstile). full body made of 1.5-2.0mm thinckness 304 or 316 stainless steel;Speed Barriere RS 1007-1A upgrading product of flap gate turnstile.Speed Torniquete RS 1007-1A fame is 304 stainless steel.Speed Tourniquet RS 1007-1A consist of wing,sensors,motor,lem lamp,mechanism,electric circuit and so on.Speed Turnstile RS 1007-1A the wing hight up to 1400mm from ground.Flap Turnstile RS 1007-1A anti-crawling,anti-climbing.mainly used in high securit places.Flap Barrier RS 1007-1A with standard fire interface,wing open for evacuation evean power is not cut off when fire alarm triggered,memory can be set,swipe cards several times for group pass,fast transit speed.Speed Barreira RS 1007-1A sensors number,casing size and wing color can be customized.


Product Name 
  Speed Gate,speed turnstile,sliding turnstile
  RS 1007-1A
Framework Material 
 304 Full Stainless Steel
Drive motor  
 24V brushed
HS Code 
Passage Width 
 2 Lanes, 640mm/lane
Angle Degree 
 ≤90/120 degree
Working Environment 
 Indoors or outdoors with shed
Power Supply 
 AC220V/110V, 50/60Hz
Operation Voltage 
 24V DC
Power Consumption 
Operation Temperature 
 -15 ° C – 60 ° C
Flow Rate 
 40-45 people per minute
LED Indicator 
 Automatic arm drop when power off
Get to work state after power on  
Reset time after breakdown   


Speed Gate Turnstile System RS 1007-1A
Speed Gate Turnstile System RS 1007-1A
  • Modular reader panel – in-time market response
  • Servomotor – faster opening speed
  • 10 pairs of infrared sensors for stronger tailgate detection.
  • SUS304 stainless steel casing
  • Higher durability for longer product life cycle
  • Easy switch, easy installation – RFID, fingerprint, face, etc.
  • Bi-directional operation control
  • LED passage indicator in both directions
  • Convenient installation and maintenance
  • Various optional panels
  • Emergency mode allows free access when power failures or emergency


  • Single directional or Bi-directional is selectable.
  • Automatic reset function: swing arms will lock automatically within 5s (can be setting) if passenger delay to entry.
  • When power is off, swing arms will open automatically, which is complying with fire safety requirements.
  • LED indicator (red × means no entry; green →means entry) .
  • Easy to install and maintain.3-year warranty support.
  • Infrared sensor alarm function, in case of illegal intrusion and reverse intrusion.
  • Anti-intrusion function, the speed gate is locked automatically until valid opening signal input.
  • Anti-reverse function, the turnstile alarms if someone wants to entry in the reverse direction .
  • Anti-trailing function, the speed gate alarms if someone wants to burst in without permission.
  • Swing arms automatic resets function: swing arm will reset automatically if is off position after strong hit. The movement will not be broken or damaged for bump .
  • Speed Gate Turnstile has the fastest open and close speed rate, 0.2 second. The open and close speed rate can be adjusted .
Speed  Gate Turnstile Diagram RS 1007-1A
Speed Gate Turnstile Diagram RS 1007-1A


Speed Gate Turnstile is suitable for areas with general pedestrian traffic (e.g.: Hotel, Gym, Building, Bank, Shopping mall, Reception Area) .