Full Height Turnstile RS 999-1A

Description

Full height Turnstiles are designed so that only one person can pass through, effectively limiting foot traffic and providing greater security. It is widely used in places where strict control and monitoring of personnel entry and exit are required, such as stadiums, subway stations, airports, large event venues, etc.

Compared to other types of Turnstile, Full height Turnstile prevents people from trying to step over or around security gates due to their greater height and structural integrity. This makes Full height Turnstile a safer and more reliable access control solution.

RS Security Co.,Ltd Full height Turnstile Features

◇ It has fault self-diagnosis function to facilitate user maintenance and use.

◇ It has a variety of working modes to choose from, including two-way card reading to limit traffic, reading the card on one side and blocking traffic in the other direction, or reading the card on one side and allowing free passage in the other direction.

◇ It has two-way free passage when power is turned off and automatic recovery locking function when power is turned on, so as to quickly organize personnel evacuation in emergency situations.

◇ Anti-collision function, the fence will automatically lock when the gate opening signal is not received.

◇ When the door opening signal is received, the electromagnet automatically opens, and the arm rotates 120 degrees or 90 degrees with the gentle push of the hand. The door will stop rotating forward and lock automatically.

◇The transmission system is adopted to make Turnstile locking and unlocking at zero position more accurate and reliable.

◇It has a unified and standard external electrical interface, which can be connected with various reading and writing devices, receive relay switching signals, and facilitate system integration.

◇Remote control and management can be realized directly through the management computer.

◇With automatic reset function. After reading the valid card, if the passer fails to pass within the specified time, the system will automatically cancel the pass authority of the passer, and the restricted pass time can be set by the administrator.

◇The entire system operates smoothly and has low noise;

Technical Parameters:

◇Single door body specifications

90 degree turnstile: outer diameter 1750mm x height 2350mm (can be customized according to customer requirements)

120 degree turnstile: outer diameter 1600mmX height 2350mm (can be customized according to customer requirements)

◇Double door body specifications

90 degree turnstile: outer diameter 2500mm x height 2350mm (can be customized according to customer requirements)

120 degree turnstile: outer diameter 2300mmX height 2350mm (can be customized according to customer requirements)

◇Processing technology: CNC cutting, surface polishing, plastic spraying

◇Equipment weight: single door 250KG double door 460KG (for reference only)

◇Material: 304 stainless steel

◇Main material stainless steel thickness: 3.0mm Fence pole thickness: 1.5mm

◇Arm length: 600mm (can be produced according to customer requirements)

◇Passage width: no more than 700mm

◇Power outage control mode: free passage/no passage (optional)

◇Access mode: one-way, two-way (optional)

◇Traffic flow: Normally closed mode 25 people/minute; Normally open mode 40 people/minute

◇Shell protection: sealed and waterproof

◇Working voltage: AC220 ±10% V/50 ±10% HZ

◇Input interface: dry contact signal or 12V/24V pulse signal with pulse width ≥50ms, drive current ≥10mA

◇Turnstile opening and closing time: 1-2 seconds

◇Temperature: -40℃—— 80℃ Humidity: 5%—— 95%

◇Extended functions: counting function, display screen, direction indicator board, ceiling light, frame barrier

◇Protection level: IP65

◇Working environment: indoor/outdoor